Tag Archive | tree canopy

Tree Protection Gone Wrong

I work for a design / build landscape construction company. Part of my job is to pull permits for the installations of the hardscapes (patios, driveways, walks, pergolas, lighting, etc) along with tree permits. For me, the tree permits are the ones I’m most involved with. Sometimes, I am the arborist that visits the property before construction to determine the condition, size* and type of trees on the lot. I look at what the architect has designed for the property and determine how it will effect the trees around the site. I then produce what is called a tree survey. These surveys determine which trees stay and which trees go. My tree survey then goes to the city to determine how many inches of trees will have to be removed from the property. *Size is determined by measuring the width of the trunk at breast height or ‘Diameter at Breast Height’ (DBH), which has been determined to be 4′ 5″ (1.38m).

The city forester will look at the survey and calculate how many trees were in decent condition, of good quality or of decent size were removed. This number will translate into an inch amount the client will need to replace on their property or pay the tree inch fees. Many times, the return amount could be in upwards of 100″. Not only do the clients need to return 100″ to the property, every municipality has a different list to follow for the trees that actually count towards tree return inches. Many of these trees are native; oaks, hackberry, sycamore, tupelo, tulip trees and spruce are commonly on the approved list. However, many of my clients request chanticleer pear lined driveways and screening arborvitae are not on the list.

The trees on the survey that are marked to stay must be maintained to be able to survive construction. ‘Tree Fencing’ must be installed around the trees that are to remain. Placement of this fencing is usually 1′ foot away from the tree for each inch of DBH. As you can see in the photos below, this fencing is clearly not as far away from the trunk as it should be..  my guess these trees are about 18″ DBH requiring 18′ around the them. Let’s ice this cake with a bunch of construction waste leaning up against the trunk. The last photo shows a large amount of soil piled up on a nearby tree.

Usually, the city forester has to visit the site and approve the location of the tree fencing. I can’t imagine this was the original location (I did not do this survey). As you can see, there are many ruts from construction equipment all around the fencing. This traffic compacts the soil and suffocates the roots of the trees. It’s a slow death for the tree. A few years after the home is built, these trees will start declining and most likely will need to be removed. As these are very close to the foundation of the new home, along with being fairly large, it will be a costly removal.

Hopefully, this information will be helpful to anyone having any construction done and want to keep their trees!

 

Β© Ilex ~ Midwestern Plant Girl