Tag Archive | water feature

Build a Pondless Fountain, On the Cheap

We had to rebuild our pond when the original 5 gallon bucket we used proved not to hold enough water for us to leave for a weekend before it splashed out. Many times the Robins would sit on the fountain and during their bathing would flap a good portion of water out of the system. We decided a larger basin was needed. However, many of the basins that are specifically made for pondless fountains are very expensive. What is expensive? Anywhere between $400. and $700. dollars. I feel that cost places these fountains out of many folks price-points. I’d rather use that money towards the ‘art’ part. The part everyone sees… The fountain!

We dug-up everything that was buried and set it out for re-installation. We decided we were going to try a plastic storage container and see how well the $20. dollar bin would hold up. We dug the hole about 4″ inches larger than the bin and back-filled that area with pea gravel. We hoped it would allow the bin to freeze (expand) and thaw without cracking. So far, this fountain has been through one winter with no issue.

    

So the lid wouldn’t cave in, we set the central weight of the fountain on top of a 6″ piece of PVC pipe. The pump (with its filter) sat just outside the PVC pipe. We placed holes in the lid to drain the water back into the basin, however not enough to compromise its integrity.

After everything was installed in the basin, but before the fountain was assembled above, we checked if the pump was working correctly. Better to check now than to stack the fountain and realize there’s an issue. DoH!!

    

Everything was running well, so we continued to finish the installation by adding the grate, the pond membrane and returning the stone to the area. We then carefully stacked the fountain on the copper pipe. We plugged it in and stepped back to admire our work.

If you want to see other pondless fountain ideas, click here!

© Ilex ~ Midwestern Plant Girl